Data Acquisition and Control Cards

Pricing and Availability as of January 1, 2008

 

Each of these cards were purchased as backup hardware, the project is complete so we are offering then direct to you.
They have been installed to verify functionality, but have not been used further.

vertical line
CIO-PDSIO8, ISA-8 Relay with 8 Inputs 8 Relay with 8 Inputs

CIO-PDSIO8

General Description
The CIO-PDSIO8 combines 8 isolated AC or DC inputs and 8 electromechanical relays on a single PCI-bus compatible board. The CIO-PDSIO8 offers eight 5-24V AC or DC inputs and eight 3 Amp relay outputs (5 form C, 3 form A). A software enabled input filter is available on all channels. The board is fully connector compatible with its PCI counterparts (PCI-PDSIO8). Base Address, Interrupts, etc are set using switches on the board. Manual is available here and else where on-line

  • 5 form C, 3 form A (NO) relays
  • 8 (5V-28V) AC/DC digital input channels
  • 3 Amp, 120VAC output control
  • ISA-bus Compatible
  • Register compatible with PCI-PDSIO8 CIO-PDSIO16 & PCI-PDSIO16
  • Connector compatible with PCI-PDSIO8
Measurement & Computing sells this board for $279.00, (Click here to verify)

Our "New Old Stock" board is Only $110.00 USD.
We have 1 of these, please Contact Us to confirm availability and payment options. Price includes shipping to Contential USA Only.
NOTE: This board has been tested with RelayRunner.

CIO-DAS1402/16 multifunction analog and digital I/O board 16 CH, 100KHZ,
16 Bit A/D w/ Burst Mode

CIO-DAS1402/16

General Description
The CIO-DAS1402/16 multifunction analog and digital I/O board is 100% compatible with the DAS-1600 analog input. It is smaller and, acquires data faster, and consumes less power. Designed for applications where price is a factor and only analog input is desired, the CIO-DAS1402/16 provides:
  • Data acquisition at 100KHz with existing DAS-16 software.
  • Programmable gain.
  • Burst Mode
  • Smaller footprint, fewer components.
  • Consumes only 5V from PC.
  • OEM Power engine for analog data acquisition.
DAS1600 COMPATIBILITY
Computer Boards designed the CIO-DAS1400 to be register and connector compatible with the DAS-1600 family. Computer Boards offers 3 different configurations of DAS-1600 and virtually every data acquisition software package supports the DAS-1600 register set. If you have applications designed for the DAS-16 and are ready to propagate those either within your facility or as a commercial product, these smaller, less expensive DAS16s may be just what you need. Manual is available here and else where on-line

Features:
  • 8 ch diff. / 16 single-ended
  • 16-bit A/D
  • Burst-mode A/D timing
  • 512 sample FIFO
  • 3 counters
  • 8-bits digital I/O


Analog Input Specifications:
Input resolution: 16-bits (1 in 65536)
Input ranges: ±10V, ±5V, ±2.5V, ±1.25V, 0 to 10V, 5V, 2.5V, 1.25V
Range selection: Software programmable
Bi/Unipolar select: On-board switch
Max sample rate: 100 KHz (utilizes 512 sample FIFO & DMA transfers)
Trigger/timing: Int/ext clock, level trigger, burst-mode support
Input Impedance: Greater than 10 Megohm

Digital Input/Output:
Number of bits: 8, 4 input, 4 output
Digital I/O specs: TTL series
Counters: 3, 2 dedicated to A/D timing
Measurement & Computing sells this board for $759.00, (Click here to verify)

Our "New Old Stock" board is Only $259.00 USD.
We have Only 1 of these left, please Contact Us to confirm availability and payment options.
Price includes shipping to Contential USA Only.

PCL-725 Relay with Inputs 16 CH, 100KHZ,
16 Bit A/D w/ Burst Mode

Advantech / eAutomation PCL-725

General Description
The PCL-725 relay actuator and isolated D/I card provides eight electromechanical SPDT relays and eight optically-isolated digital inputs on a half-size card. Its eight on-board SPDT relays are ideal for applications such as device On/Off control or low power switching. A red LED next to each relay shows its On/Off status for easy monitoring. The PCL-725’s eight optically-isolated D/I channels are ideal for digital input in noisy environments or with floating potentials. You can configure each input channel individually for either isolated or non-isolated input by setting jumpers. An on-board DB-37 connector provides access to all input and output channels.

Overview
The PCL-725 is an 8-channel relay output and an 8-channel isolated digital input ISA-bus Data Acquisition card. The PCL-725 has a robust I/O design with 1,500Vdc isolation protection for industrial applications. In digital input channels, the PCL-725 provides wide sink/source input range (+/-5~24Vdc). Each DI channel can be configured as either isolation or non-isolation mode. The PCL-725 has wide input range and it is suitable for most industrial applications with 12Vdc or 24Vdc input voltage. In relay output channels, the PCI-1725 provides 4 Form A and 4 Form C relays with 1A@30Vdc or a 0.5A@120Vac contact rating, on-board red LED indicators to notify activated relays. The PCL-725 is an ideal solution for machine builders where a 110Vac/30Vdc small-power switch or device on/off control is required. In addition, it includes a DB-37 connector. Manual is available here and else where on-line

Main Features
  • 8 relay outputs
  • 8 optically-isolated digital inputs
  • LED relay status indicators
  • Smaller footprint, fewer components.
  • Isolated or non-isolated digital inputs
  • Male DB37 matching connector included

Advantech (eAutomation) sells this board for $130.00, (Click here to verify)
Circut Specialists sells this board for $210.00, Click here to verify

Our "New Old Stock" board is Only $70.00 USD.
We have Only NO Longer Available of these left, please Contact Us to confirm availability and payment options.
Price includes shipping to Contential USA Only.

CIO-DAS08/Jr 8 Channel 12 bit A/D, low cost, Ideal for learning

CIO-DAS08/JR

General Description
The CIO-DAS08/JR combines analog inputs with digital input and output capability. Analog Inputs and Outputs. The CIO-DAS08/JR can be upgraded to a CIO-DAS08/JR-AO by purchasing and installing the CIO-DUAL-DAC chip set available from Measurement and computing. Digital Inputs and Outputs There are eight inputs and eight outputs for sensing and controlling digital devices. They are port-addressable and are dedicated to either input or output. The digital outputs and inputs are TTL level. Manual is available here and else where on-line

Measurement & Computing sells this board for $209.00, (Click here to verify)

This board has been used for only 6 weeks and is Only $85.00 USD.
We have 1 of these, please Contact Us to confirm availability and payment options. Price includes shipping to Contential USA Only.
NOTE: This board has been tested with RelayRunner.
     
Valid HTML 4.01 Transitional
Google
 
Web www.emcarthur.com

Add to Your Social Bookmarks: - -

Visitors Map
several Site Map - Press Room - Privacy Policy - Disclaimer
Copyright © 1998-2008 E. McArthur unless otherwise indicated
Unauthorized duplication or publication of any materials from this Site is expressly prohibited.
    Hosting by iPower