Unsolicited Testimonials, the best kind
Thanks guys, after losing all my information from my computer due the inevitable computer crash,
I have finally got back to you. Love the program, we use it in the radio station to trigger
computers to our 2 relay stations over the weekends. Just what we wanted.
Will go now to PayPal and see if I can get this payment to you (after long last)
Thanks, Greg Symes, Power Country FM (Austrailia) 5/2006
We all here would like to thank you. We are using your program in a failure analysis system.
We use the input counter to determine when the part breaks. This saves time. We would like
to see the counter limit increased to 100k count. As we check and write the number in the
log and reset it. The cyclic rate is great.
Sincerely, Jim Winters, Failure Analyst, Baxion I.T.L. 9/2005
I have used the relayrunner for my tomato growing hydroponics system for 6 years.
Its on a old 486 with 16 meg of ram and a 30 g drive. I love to change things and
only use 2 channels for growing, the other channels are for my garden.
When it rains I just hit the stop icon, and I save water and money.
The tomatoes are watered twice a day and lights are on 20 hrs and off 4.
One channel feeds the trees 1 time a week for 1 hr (slow soakers) the others
are for the lawns. My wife is in to the ecology thing and she loves it.
Thanks for a great product, Name Withheld by Request 2/2004
Like to thank the programmers for a great program. My boyfriend hooked up the relays
in the grow room. I am not in to all that tech stuff , l like to look at what's there
and do it. I thinks its been over 3 years with the old version, and updated to the
new version. I found out my clones and growing plants only like water every other day,
nice feature every even day, or odd day.
Not much of a believer in anything. Have been testing your program, with a i/o board,
using a Pentium 1.7, with a 128 meg memory. The counter has a 32,000 top end, which
for growing is like 87.67 years of on and offs. After 10 test runs I stopped testing.
My check is enclosed. Tests were all mixed up to try to screw the program up.
Very good job, The full screen thing has its, good points.
Fellow growers,
I use RR for a hydroponics system and its been running over 9 years now.
I run it for all sequences of a grow.
I have a sequence for cloning, growing, blooming, end blooming, dark blooming and flushing.
Only 2 clicks to change from one sequence to another.
Any single parameter is changed with just 1 or 2 clicks.
It did fail once, a power outage same time as a dead computer battery.
I was too cheap or lazy to replace the battery every 2-3 years and both happened at the same time.
I put in a new battery, set the time on the computer an off it went.
I am smarter now, I mark the next replacement date on the front of the computer.
Normal power outages, with the auto restart work every time.
The few seconds it takes to run a new blooming schedule, and save the old one, is great.
I love the new bigger numbers on the upgrade.
I have mine on a wired network and about 100 feet from the project, of hydroponics.
The newest version has the reminder (Wink' Wink') window just incase the somebody like
the cops see it on the screen you just hit it and it turns off the whole system.
I have a hidden switch on the door, which kills the whole thing if not bypassed.
I have been away from my system for over a month and no problems.
I have a strip chart checking the system.
RR works and is worth the price.
In one word bitchen, SanClem
Del.icio.us
Digg 
Furl
Reddit 
Simpy
Spurl
Y! MyWeb
StumbleUpon